Waxing your snowboard is an important part of keeping it in good condition and extending its life. It also makes it perform better and look better. You can buy a wax kit that has everything you need, or you can purchase the supplies separately. Either way, it’s not difficult or expensive to do it yourself. Just follow these simple tips:
– Choose the right wax. There are different types of wax for different snow conditions. For example, if you’re going to be riding in powder, you’ll want to use a powder wax.
– Make sure your board is clean before you wax it. Otherwise, the wax won’t adhere properly and will just end up making a mess.
– Follow the directions on the wax package. Each brand is a little different, so it’s important to read the instructions carefully before you start.
– Use a hair dryer to melt the wax into the board. This will help it spread evenly and make it easier to apply.
– Use a soft cloth or paper towel to buff the wax after it’s been applied. This will give your board a nice shine and help keep the wax from rubbing off onto your clothes.
Why You Should Wax Your Snowboard
Most people think that they don’t need to wax their snowboard if they don’t ride in powder. Even if you only ride in the park on man-made snow, it’s a good idea to wax your board regularly. Here are five reasons why:
1. Wax protects the base of your snowboard from the elements and from wear and tear.
2. Waxing makes your snowboard easier to turn.
3. Waxing gives you better edge control.
4. Waxing makes your board faster.
5. Waxing makes your board look better!
Waxing is relatively inexpensive and easy to do, so there’s no excuse not to do it regularly. Check out our step-by-step guide on how to wax a snowboard for tips on doing it yourself, or take it to a professional if you’re not sure how to do it properly.
When to Wax Your Snowboard
One of the most important aspects of keeping your snowboard in good condition is regularly waxing it. Waxing your board helps to protect it from the elements and keeps it performing at its best. But knowing when to wax your snowboard can be tricky.
Here are a few tips to help you know when it’s time to wax your board:
-If you can see bare spots on the topsheet of your board, it’s time to wax. Waxing will help to protect the topsheet from further wear and tear.
-Wax your board before every trip to the mountain, even if you haven’t ridden it in a while. A fresh coat of wax will help your board glide better and make it easier to turn.
-If you notice that your board isn’t sliding as smoothly as it used to, or if it feels slower than usual, it’s probably time for a wax. A fresh coat of wax can help restore your board’s performance.
-Waxing also helps to protect your board from rust and corrosion, so it’s a good idea to wax even if you’re not planning on riding soon.
How to Wax Snowboard
One of snowboarding’s annual rituals is giving your board a good waxing. It not only makes your board look nice, but it also protects it from wear and tear, and helps it glide better on the snow. Here are five tips to help you get the best results when waxing your snowboard.
1. Choose the right wax. There are two main types of wax—hot wax and cold wax—and each has its own benefits. Hot wax is melted onto your board and then rubbed in, making it ideal for getting into all the nooks and crannies. Cold wax comes in a solid form that you rub onto the board, which is great for larger surfaces.
2. Get rid of any old wax first. Before you apply any new wax, make sure to remove any old wax that’s still on your board. The easiest way to do this is to use a hairdryer on low heat to melt the old wax, and then wipe it away with a clean cloth.
3. Apply the wax in small sections. Once you’ve decided on which type of wax to use, it’s time to apply it to your board. Start by doing small sections at a time so that the wax doesn’t have a chance to dry before you rub it in.
4. Use a circular motion to rub in the wax. Use a firm, circular motion when rubbing in the wax so that it evenly coats the surface of your board. Be sure to go over each section multiple times until the entire surface is covered.
5 .Finish up with a polish . Once you’ve finished applying and rubbing in the Wax, give your board one last going-over with a clean cloth to remove any excess Wax and leave behind a nice shine
What Kind of Wax to Use
There are different types of wax for different temperatures, so make sure you know what kind of wax to use. For example, if it’s really cold out, you’ll want to use a harder wax. If it’s warmer, you can use a softer wax. You can usually find this information on the packaging.
There are also universal waxes that work well in a variety of conditions. These are great if you don’t want to keep track of different types of wax or if you’re just getting started.
How Often to Wax Your Snowboard
Whenever you notice your snowboard isn’t sliding as smoothly as usual, it’s time to give it a good wax. For most riders, this means waxing two to four times per season. If you live in a warm climate or only ride on groomed trails, you can probably get away with fewer waxes. But if you frequently ride in cold weather or through deep powder, you may need to wax more often. You should also wax your board after any major repairs, such as fixing a core shot.
Tips for Storing Your Snowboard
If you’re lucky enough to have a garage, this is the ideal storage solution for your board. The key is to make sure that the temperature in the garage stays consistent — too hot and the wax will melt, too cold and it will become brittle. You should also keep your snowboard away from any chemicals or fumes that might damage it.
If you don’t have a garage, any cool, dry place will do — just avoid places that are likely to fluctuate in temperature or humidity, like attics and basements. You might also want to consider investing in a snowboard bag or case to protect your board from nicks and scratches.